Victor Reinz EMEA
Change region
Just seal it!

Sealants and Sealant Remover

Sealants and Sealant Remover
Choose among three options of how to use the right amount of sealant the fastest and safest way.

Option 1 – Feeler Gauge and the Gap to Be Sealed

The solution for the professional. The feeler gauge tells you what you need. For gaps of up to 0.14 mm between the two
sealing surfaces, REINZOPLAST is the right choice.
For larger gaps (≥ 0.15 mm) REINZOSILseals quickly and reliably.


Option 2 – The Properties

If you prefer to make your decision based on temperature, the durability of the medium, or drying times, then the ‘Properties’ overview is the right tool for you. It shows you in detail all the technical properties of REINZOSIL and REINZOPLAST.



REINZOSIL

  • Solvent-free, permanently elastic, fast-curing siliconesealing compound
  • Resistant to temperatures from – 50 °C to + 300 °C
  • Very good fluid resistance
  • Fast, acid-free curing
  • Odorless
  • Non-hazardous substance (tube)
  • Sealing gap ≥ 0,15 mm


REINZOSIL -t

  • The transparent version of REINZOSIL for visible sealingjoints
  • Solvent-free, permanently elastic, fast-curing siliconesealing compound
  • Resistant to temperatures from – 50 °C to + 200 °C
  • Very good fluid resistance
  • Fast, acid-free curing
  • Odorless
  • Non-hazardous substance
  • Sealing gap  0.15 mm


REINZOPLAST

  • Permanently plastic, non-hardening PU sealing compound
  • Resistant to temperatures from – 50 °C to + 300 °C
  • Very good fluid resistance
  • No cracking from vibrations
  • Non-hazardous substance
  • Sealing gap  0.14 mm


RE-MOVE

  • Highly effective, low-consumption sealant remover on the basis of ether solvent and propellant
  • High-bonding liquid film
  • Also suitable for use on inclined and vertical surfaces
  • Also suitable for removal of resin and lacquer residues
  • Fast application
  • Will not damage the sealing surface



Very important: Before you begin to apply the sealant, the sealing surfaces must be cleaned. With RE-MOVE you can now get a cleaner sealing surface even faster.

How it works:
  • Cover oil and water channels as well as bearing surfaces if applicable
  • Shake can well before use
  • Spray sealing surfaces until there is a consistent moisture film, and let soak for 10 min.
  • Remove residuals with brush or spatula (Attention: Don’t damage the sealing surfaces!)
  • Rub sealing surfaces dry with dry/lint-free cloth
  • Turn can over after use and spray until spray head is empty